Last updated on April 24, 2020 by

Spring reverb has an incredibly unique sound. It’s the perfect, finishing touch on tons of mixes.

Today you’ll learn how you can use spring reverb in your own mixes.

So if you want to make your songs stand out with unique effects, you’re in the right place!

Want your mixes to sound pro?

Before we continue… I’m guessing you’re here because you want to make music that sounds professional.

That’s why we created this new free workshop for people who want the entire framework for making radio-ready music at home.

Inside, we share the only 7 steps you need to go through if you want your mixes to sound professional.

So, if you just want a shortcut to pro-quality mixes, watch this free training now:

But if you just want to learn about Spring Reverb specifically, keep reading.

 

What Is Spring Reverb?

Spring reverb is a special type of reverb that’s been super popular since the 1960s.  By feeding a sound through springs, it creates the illusion of reverb. The result is a metallic, otherworldly echo.

metal spring from a spring reverb tank

There are tons of software versions out there, but the original spring reverbs are hardware. Many guitar amps and professional studios use these hardware units even today.

It’s a must if you’re writing rock, blues, reggae, or really anything with electric guitar. But its uses go way beyond that.

Spring reverb has an extremely unique sound, making it perfect for all kinds of effects.

 

So What Does It Sound Like?

person listening to a mix inside of a coffee shop

Let’s check out a few different examples of spring reverb. You’ll notice that it has a very tinny, metallic tone with plenty of feedback.

Original guitar recording:

 

Guitar with spring reverb:

 

Sounds familiar, right? You’ll hear spring reverb on just about every electric guitar tone.

It’s a big part of why guitars can shine through a busy mix.

You’ll also hear spring reverb used on plenty of rock vocals.

Original Vocal Recording:

 

Vocal With Spring Reverb:

 

It may not be the most realistic sounding reverb. But that’s not the point.

It’s meant to sound cool, not real.

 

How Does Spring Reverb Work?

3D question marks

Spring reverb creates the illusion of reverberation.

A few springs are stretched across a metal box. When sound goes through this box, it causes the springs to vibrate.

These vibrations move back and forth through the springs.

This back and forth motion sounds like an echo. So even though your guitar isn’t actually reverberating through a room, it sounds like it is.

 

Common Uses

You can use spring reverb on anything and everything. And plenty of people do!

Some mixing engineers use spring reverbs almost exclusively.

But there are a handful of instruments it’s especially popular on. Let’s look at some of the places you’re most likely to hear spring reverb.

 

Guitar Amps

fender guitar amplifier with spring reverb tank

Like I said earlier, spring reverb will put the finishing touch on your guitar tone. It’s a crucial part of many iconic sounds.

 

Snare Drums

snare drum

You may not realize it, but you’ve probably heard tons of recordings that had spring reverb on the snare.

This technique was especially popular with reggae and dub.

Rock bands started drawing more and more influence from these genres. So springy snares made their way into other styles.

Check it out.

Original Drum Recording:

 

With spring reverb on the snare:

 

In all likelihood, you won’t want to do this on every mix. But when it fits the song, this trick can add some really cool texture.

Pair it with a tape delay to really complete the effect.

 

Vocals

person singing into a microphone with spring reverb on the track

If you want your vocals to sound a little bit grittier, here you go.

The dark, metallic tone of spring reverb adds edge to a sound. Lots of rock bands use it to dirty up their vocal tracks.

That’s why spring reverb is great for more abrasive mixes.

 

Synths

room full of guitars, keyboards, and mixing gear

As synths became more popular, people began throwing spring reverbs on them. And lo and behold, it sounds awesome!

Sometimes synths can sound a little too pristine. Especially ones that are “in the box” or, in other words, created in your DAW.

Original synth recording:

 

Synth with spring reverb:

 

Spring reverbs are useful for adding some natural grit to an overpolished synth.

 

Hardware or Software?

spring reverb preset from Logic Pro X's Space Designer

The age-old question: Which is better, hardware or software?

In this case, it kind of depends on what you’re going for.

Do you mostly perform live? You may want to get an amp that has a spring reverb unit.

In fact, your current amp may have one already.

But when it comes to recording, software will work just fine. It’s easy to use and oftentimes sounds really quite close to the real thing.

 

Recommended Software Plugins

There’s a good chance your DAW already has some solid options.

Look through the presets in your stock reverb plugin for any that have “spring” in the name. You’ll probably find a few.

But if you just can’t get enough spring reverb, check out Springbox.

PSP’s Springbox is an incredible plugin at a pretty low price. It’s my personal go-to for all my spring needs.

 

Bonus Tip: Cut the Crap

I highly recommend placing an EQ before your spring reverb.

Spring reverb is really good at accentuating mid-range and high frequencies. It’s likely to turn up any nasty resonances in a recording.

So cut those resonances out before they even get to the reverb.

eq plugin with surgical cuts in the upper mids to remove resonance

That way, your listeners can enjoy the song without hurting their ears.

 

Conclusion

Whether you’re playing live or in a studio, spring reverb can be a huge boon for your songs.

It’s especially useful on electric guitars, vocals, and snares.

So next time you’re working on a mix, try it out for yourself!

7 Steps to Pro Mixes at Home

Here’s the thing…

You can do this perfectly and still end up with music that sounds amateur if you’re missing a crucial step.

There is SO MUCH that goes into a good song and a professional mix. It’s actually pretty overwhelming.

Once you’ve learned how to use the software, there’s a lot of other stuff you need to get right if you want your music to sound professional.

But what if I told you that you don’t have to be an expert (with years of experience) to make radio-ready music at home?

Well…

That’s the truth.

It’s likely that you’ve already wasted time, money and effort on the wrong things. Most of us do. We waste years focusing on the wrong things.

So, what should you focus on if you want fast results?

Inside this new free training, you’ll learn the secret to making radio-ready music at home.

With this new approach, you’ll know exactly where to spend your time and energy. You’ll no longer feel confused and overwhelmed by the recording and mixing process.

So, if you want to learn the *exact* steps that will take your mixes to a professional standard in under a year…

Watch this free workshop now:

 

It’s only playing for a limited time – we’re always updating the site and this could get removed soon. So go and check it out now.

Leave a Reply

Your email address will not be published.