Last updated on March 4, 2020 by

Subtractive synthesizers are probably the most popular synths out there. Luckily, they’re also the easiest to use!

If you want to harness the power of these exciting instruments, you’re in the right place. This quickstart guide to subtractive synths will have you creating incredible sounds in no time.

 

But before we continue…

I’m guessing you’re here because you want to make music that sounds professional in your home studio.

Learning about this important, but it’s just one piece of the puzzle.

That’s why I created this new free workshop for people who want the entire framework for pro mixes.

Inside, I share the only 7 steps you need to go through if you want your mixes to sound professional.

You will also learn the #1 mistake that musicians make when it comes to recording their own music​​​​​​​​​​​​​​.

So, if you just want a shortcut to pro-quality mixes, watch this free training now:

 

But if you just want to learn about mixing with subtractive synths specifically, keep reading.

 

Synth Basic (Everything You Need to Know)

Subtractive synthesizers are probably the most popular synths out there. Luckily, they’re also the easiest to use! If you want to harness the power of these exciting instruments, you’re in the right place. This quickstart guide to subtractive synths will have you creating incredible sounds in no tim

This article is part of our “Synthesizer 101” series.

If anything in this article confuses you, I probably talk about it in the video above, or the article below. Check it out!

What Are Synthesizers? (The 4 Basic Building Blocks of Synths)

 

Subtractive Synthesizers

Subtractive synths are probably the most popular ones out there.

Subtractive synthesizers are probably the most popular synths out there. Luckily, they’re also the easiest to use! If you want to harness the power of these exciting instruments, you’re in the right place. This quickstart guide to subtractive synths will have you creating incredible sounds in no tim

As the name suggests, subtractive shapes a sound by cutting frequencies out.

It’s a lot like sculpting. Starting with a huge hunk of rock, you gradually chisel away at it, revealing the sculpture within.

In subtractive synthesis, you start with a sound that already has tons of harmonics. Using filters, you cut out any frequencies you don’t want.

Since you have a rich sound to begin with, subtractive synths don’t need many oscillators to sound huge. Usually it only needs one to three oscillators to make all kinds of exciting sounds.

Here’s a list of some of the most iconic waveforms used in synths:

synthesizer waveform

You’ll see these in just about any subtractive synth  you come across.

 

Subtractive Synthesis in Action

If my song needs a bass synth, I can make one quickly and easily with subtractive synthesis.

First, I’ll pick out a sound wave that’s got plenty of frequencies to work with.

Logic’s RetroSynth lets me use two oscillators at once. So I’ve gone ahead and picked out two saw waves.

subtractive synth oscillators

Together they sound like this:

As you can tell, there are still a lot of higher frequencies in there. If I tried to use this as a bass, it’d end up clashing with the rest of my mix.

That’s where filters come in!

synth filter

By putting a low pass filter on the synth, I can make sure it only plays lower frequencies.

Instead of calling them high pass or low pass filters, many synths shorten it to HP or LP.

The number after the letters describes how strong the filter is.

A higher number means a stronger filter. So LP 24 will cut out more frequencies than LP 12.

The cutoff determines where the filter starts cutting. So when I turn the cutoff down, I get rid of more higher frequencies.

By selecting a low pass filter and turning the cutoff way down, I’ve honed in on a nice bass sound really quickly. Here’s what those two saw waves sound like now:

Much better!

I could even make a cool effect using this low pass filter. By automating the cutoff up and down, I can make the synth sound fuller during big sections of the song.

Most subtractive synths have more options than just low pass and high pass filters. Bandpass filters cut out both high and low frequencies.

Comb filters make small pockets throughout the frequency spectrum. That creates deep cuts on a bunch of isolated frequencies.

Both of these sound way different than a high pass or low pass filter. Check out the different filters on your synth of choice and see what they all sound like.

 

Getting Creative with Subtractive Synthesis

Nowadays, most synths aren’t just additive or subtractive. Most synths combine ideas from either additive or subtractive with another type of synthesis.

For example, a lot of wavetable synths use subtractive synthesis.

Don’t like the mid-range of the synth you’re working with? Pop open a filter and cut some frequencies out!

 

Conclusion

And that’s how subtractive synthesis work!

Subtractive filters frequencies out of a sound that’s already complex.

As you keep working with synths, you’re definitely going to run into these instruments.

Finding yourself confused as to how either of them work? Come back to this article for a refresher on these fundamental types of synths!

 

But this is just one small part of the process.

You can do this perfectly and still end up with mixes that sound like bedroom demos if you’re missing a crucial step (it took me 10 years to learn this).

There is SO MUCH that goes into a good mix. It’s actually pretty overwhelming.

Once you’ve learned how to use the software, there’s a lot of other stuff you need to get right if you want your music to sound professional.

But what if I told you that you don’t have to be an expert (with years of experience) to make radio-ready music at home?

Well…

That’s the truth.

It’s likely that you’ve already wasted time, money and effort on the wrong things. I know I did. I wasted years focusing on the wrong things.

So, what should you focus on if you want fast results?

Inside this new free training, I share the secret to making radio-ready music at home.

After I stumbled upon this new approach, I knew exactly where to spend my time and energy. I was no longer confused and overwhelmed by the recording and mixing process.

Now it’s your turn.

If you want to learn the *exact* steps that will take your mixes to a professional standard in under a year…

Watch this free workshop now:

 

It’s only playing for a limited time – we’re always updating the site and this could get removed soon. So go and check it out now.

What did you think of this post? Please give it a rating below.

Leave a Reply

Your email address will not be published.